Tate Lab Wiki

You are here: start » thermal

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
thermal:start [2015/09/03 13:52] – jamesthermal:start [2020/03/06 09:04] (current) – external edit 127.0.0.1
Line 5: Line 5:
  
 == 12 August 2014 == == 12 August 2014 ==
-Leak detected between bell jar and base plate.  Awaiting parts for the diffusion pump cooling lines flow switch.  Researching replacements for malfunctioning crystal monitor controllers.+**Inactive** - Leak detected between bell jar and base plate.  Awaiting parts for the diffusion pump cooling lines flow switch.  Researching replacements for malfunctioning crystal monitor controllers.
  
  
Line 27: Line 27:
 ===== Maintenance Log===== ===== Maintenance Log=====
  
-06/19/2014 - Diffusion pump cleaned, and oil changed. - JH+== 09/02/2015 - JH ==
  
-06/19/2013 - Roughing pump oil changed. Old oil in good condition.  - RW+- Chiller water turned black due to the break down of glycol in the cooling water (causing the cooling water to become corrosive).  Chiller is being flushed, sanitized, and refilled by [[http://www.chemaqua.com/index2.asp|Chem-Aqua]].
  
-07/13/2012 - Diffusion pump oil changed. Refilled with 200 cc Dow 704. Old oil had yellowish color. No visible debris. Some tarring on the DP walls. Fixed minor leaks in deposition rate detector water lines. Chamber now holds at 0.1 Torr for 3+ days.  - RW+- Update to the waterlines for cooling the evaporation terminals and crystal monitors is complete.
  
-07/03/2012 - Roughing pump oil changed. Good color. Some debris. - RW+- Water leak found for line going into diffusion pump, possibly caused by the corrosive water in water the lines.
  
-8/09/2011 - Roughing pump oil changed. Old oil was brown and had significant amounts of debris floating in it. Added a permanent maintenance log to the blue binder holding all of the user manuals for the system. - RW +== 06/19/2014 - JH == 
 +- Diffusion pump cleaned, and oil changed.
  
-6/17/2011 - Inside of bell jar and all surfaces cleaned. Shutter operation fixed. Ion gauge degaussed; now reads more realistic pressure. - RW+== 06/19/2013 - RW == 
 + 
 +- Roughing pump oil changed. Old oil in good condition. 
 + 
 +== 07/13/2012 - RW == 
 + 
 +- Diffusion pump oil changed. Refilled with 200 cc Dow 704. Old oil had yellowish color. No visible debris. Some tarring on the DP walls. Fixed minor leaks in deposition rate detector water lines. Chamber now holds at 0.1 Torr for 3+ days. 
 + 
 +== 07/03/2012 - RW == 
 +  
 +- Roughing pump oil changed. Good color. Some debris. 
 + 
 +== 8/09/2011 - RW == 
 + 
 +- Roughing pump oil changed. Old oil was brown and had significant amounts of debris floating in it. Added a permanent maintenance log to the blue binder holding all of the user manuals for the system. 
 + 
 +== 6/17/2011 - RW == 
 + 
 +- Inside of bell jar and all surfaces cleaned. Shutter operation fixed. Ion gauge degaussed; now reads more realistic pressure.
  
 ====== Schrader Thermal Evaporator Wngr 489 ====== ====== Schrader Thermal Evaporator Wngr 489 ======

Trace:

QR Code
QR Code thermal:start (generated for current page)