Tate Lab Wiki

You are here: start » electronmicroscopy

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
electronmicroscopy:start [2012/02/01 12:49] – janetelectronmicroscopy:start [2020/03/06 09:04] (current) – external edit 127.0.0.1
Line 2: Line 2:
 [[http://www.science.oregonstate.edu/emfacility/|The OSU Electron Microscopy Facility]] located in Linus Pauling Science Center [[http://www.science.oregonstate.edu/emfacility/|The OSU Electron Microscopy Facility]] located in Linus Pauling Science Center
  
-Tate group contact is Chris Reidy.+Tate group contact is Bethany Matthews <del>Chris Reidy</del>.
  
   * FEI NOVA NanoSEM 230 - High resolution SEM with in lens detector   * FEI NOVA NanoSEM 230 - High resolution SEM with in lens detector
Line 12: Line 12:
   * Simulation Software    * Simulation Software 
  
-===== Update 1 Feb from Yi Liu =====+===== Guides ===== 
 +{{:electronmicroscopy:QuantaManual.pdf|Quanta SEM Manual}} 
 + 
 +{{:electronmicroscopy:Helios.pdf|Helios SEM Manual}} 
 + 
 +===== Tutorials ===== 
 +  * [[http://www.microscopy.ethz.ch/elmi-home.htm|Primer on TEM]] from ETH, Zurich 
 +  * [[https://mrl.illinois.edu/sites/default/files/AMC/downloads/AMC-Workshop-2012_Tutorial-8_TEM.pdf|TEM Workshop]] by Shah, UIUC 
 + 
 +===== Titan Update 22 Nov 2013 from Pete Eschbach ===== 
 + 
 +Recently we have had both spectacular nano particle images come from the Titan and other images that are not so high quality.  Much of the issue is sample prep and grid selection.  For example, using too much solution (water or ethanol) and or not making the grid hydrophillic with glow discharge prior to pipetting solution to the grid.  Please see the attached word file (below) and ask us if you have any questions at all.   
 + 
 +Nano Particle Grid Preparation 
 +Pete Eschbach and Teresa Sawyer 
 +Electron Microscope Facility, OSU 
 + 
 +1. First step is to select the grid for the job.  We have a handout in the lab in the grey inboxes on the South side of conference room.  Please ask us if you have questions, we are here to help.  An ounce of preparation saves a pound of grief later!  Ultrathin carbon or holey carbon is the best suited for fine nanoparticles.  If beam stability becomes an issue, you will need to up the thickness of carbon.  If I were to by one grid it would be a Ted Pella 08142 or 08142G(gold), this is a 300 mesh grid with a ultrathin carbon support film for high resolution imaging.  It is more fragile than a traditional carbon coated Formvar but offers high resolution TEM imaging in the holes! 
 + 
 +A new alternative is Quantafoil from EMS, EMS numbers such as Q225-CR2.   Quantafoil makes low dose techniques work as the hole pattern is regular and the beam can be shifted a preset amount every time.   
 +2. Plasma treat your grids to make them hydrophilic (attract water).  We do this with the home built glow discharge in the EM Facility sample preparation room.  But, we just ordered an EasiGlow system from Ted Pella to make it easy for students.  
 +3. Now get 3 tweezers with O ring to lock the jaws of the tweezer.  Pick up a grid in each tweezer and lock it in with an O Ring.  There is a handout in the lab of supplies that will make grid handling easier. 
 +4. Now dispense 2-3 uL of your nanoparticle suspension on the grid.   
 +5. Wick off excess after 1 -2 minutes.   
 +6. Let it dry overnight in a clean dry nitrogen cabinet or a desiccated cabinet.   
 +7. Release your grid into a grid box by moving the O Ring off the tweezer.   
 +8. Lab staff will be happy to show the fine points for grid preparation. 
 + 
 + 
 + 
 +===== Update 1 Feb 201? from Yi Liu =====
 Dear Colleagues, Dear Colleagues,
    

Trace:

QR Code
QR Code electronmicroscopy:start (generated for current page)