opticalspectrometers:start

Tate Lab Wiki
You are here: start » opticalspectrometers
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Optical Spectrometers =====
Located in David McIntyre's lab Weniger 118.

====Scanning Monochromator====
The Scanning Monochromator can make transmission, specular reflection, and diffuse reflection measurements on thin film, single crystal, and powder samples.

=== Sources ===
There are two broadband sources for the Scanning Monochromator.  The W-halogen lamp is used in the visible and NIR (note spectrum depends on filters and grating used):

{{:opticalspectrometers:w_lamp_spectrum.png?500|}}

and the Xe lamp in the UV-and visible.

{{:opticalspectrometers:xe_lamp_spectrum_1.png?500|}}


===Detectors===
There are two detectors for the Scanning Monochromator.  The Silicon detector is 13 mm^2 and works in the UV-Vis range 350-1100 nm (down to ~1.1 eV).

The InGaAs detector is used for NIR measurements and is 3.1 mm^2 and thus it's is much more difficult, compared to the Si detector, to capture all the light. This detector can work in the range of 800-1800 nm.

===Gratings===
There are five sets of gratings for the monochromators - 0.25 µm, 0.5 µm, 1.0 µm, 2.0 µm, and 4.0 µm.  The number indicates the wavelength at which the gratings perform the best.  Typically, for UV-Vis measurements, you want to use the 0.5µm gratings, because the lamp is fairly weak at this wavelength, yet very intense at 1.0 µm.  Thus, you're unlikely to get a usable signal at 500 nm with the 1.0 µm gratings, but you will still get a strong a signal at 1 µm when using the 0.5 µm gratings.

{{:opticalspectrometers:w_spectrum_small.png|:opticalspectrometers:w_spectrum.png}}

===Sampling Accessories===
The Scanning Monochromator has an Oriel 70491 integrating sphere to make diffuse reflection measurements.

====Ocean Optics Spectrometer====
The Ocean Optics Spectrometer can make transmission, specular reflection, and diffuse reflection measurements on thin film, single crystal, and powder samples. Diffuse reflection measurements can only be made on strongly diffusely reflecting materials.

===Detectors===
The Ocean Optics spectrometer has two detectors: Ocean Optics HR 4000 and Ocean Optics NIR256-2.5. 

An Ocean Optics HR 4000 spectrometer was used to take the ultraviolet-visible spectra. The HR 4000 has a 3648-element CCD-array detector with optical resolution of 0.27 nm. The ultraviolet-visible measurements spanned a wavelength range from 200 nm to 1150 nm.

{{:opticalspectrometers:dh2000-bal_lamp_spectrum.png?500|}}


Ocean Optics NIR256-2.5 spectrometer was used to take the visible-near infer red spectra. The NIR256-2.5 has an InGaAs detector array with an optical resolution of 6.85 nm.  The visible-near infer red measurements spanned a wavelength range of 850 nm to 2600 nm. 

{{:opticalspectrometers:hl-2000-fhsa_lamp_spectrum.png?500|}}

===Light Sources===
An Ocean Optics Mikropack DH-2000-BAL Deuterium Tungsten Halogen Light Source was used for the ultraviolet-visible measurements and an Ocean Optics Mikropack HL-2000 Tungsten Halogen Light Source was used for the visible-near infer red measurements. The spot size and incidence angle for both instruments are approximately 1.5 mm and 0 º.

===== Software & Data Analysis =====
  * Levi Kilcher wrote an Excel sheet called {{:opticalspectrometers:index_calc_2006b.xls|index calc (2006 version is here)}} to analyze R & T data from the grating spectrometer, to get index, band gaps etc.  Here is a {{:opticalspectrometers:index_calc.pdf|help file for the index calc spreadsheet}}. See also Reports page for presentation, and Levi Kilcher's thesis on thesis page.
  * The Index_Calc2006.xls spreadsheet was fixed by James Haggerty (01/31/15).  The Macro buttons should now be functional
  * Scout software is being implemented by Aaron Kratzer (2013). [[:ScoutManual|Working user manual]]
  * Here is a .zip file, {{:opticalspectrometers:example_file_structure.zip|}} which contains a file structure to help keep you organized as well as all the spreadsheets needed to calculate the band gap for a material.
    * There are quite a few spreadsheets in this zip file and as a result it is rather large (19Mb), so it may take a while to download.
    * First things first, make sure to extract this zip file to the location you would like to store all of your optical data.  A folder named "example_file_structure" is the top level, rename this folder something like "Optical_Data".
    * Inside the "example_file_structure" folder you will find another folder named "Material_Name", copy this folder (create a new copy to save the original for adding materials) and rename it for the material you are studying.  For example if you are studying ZnO, then name the folder "ZnO".
    * Inside the "Material_Name" folder you will find a folder named "Sample_ID", copy this folder (create a new copy to save the original for adding samples) and rename it with the sample ID for the individual sample you are studying.
    * Inside the "Sample_ID" folder you will find three more folders, GS for Grating Spectrometer data, OO for Ocean Optics Fiber Optic Spectrometer data, and Optical Comparisons for comparing measurements between the two spectrometers.
    * Inside both the GS and OO folders are similar folders, first there are folders for raw data (one folder for each type of measurement that can be made, for example you can make a measurement on the GS using the Xe lamp and the Si Detector), next there are the folders "Optical_Plots", "Optical_Comparisons", and "Optical_Calculations".

===== Documentation =====
There is a manual for the OO spectrometer located permanently in Wngr 118. Never remove it from that room. The manual is based on some of the following documentation: 
  * {{:opticalspectrometers:hr4000_detector.pdf|HR4000_detector.pdf}}
  * {{:opticalspectrometers:nir256-2.5_detector.pdf|NIR256-2.5_detector.pdf}}
  * {{:opticalspectrometers:fiber_optic_spectrometer_manual.doc|OO Fiber Optic Spectrometer Manual}} written by Josh Russell; last updated 2009.
  * {{:opticalspectrometers:ea_ocean_optics_proc.pdf|Ocean Optics Walkthrough}} - Emmeline Altschul, 2011
  * {{:manuals:Filmetrics_F20_manual.pdf|Filmetrics F20}}
  * {{:opticalspectrometers:filmetrix_ref_technote.pdf|Filmetrix technical note}}

===== Optical data =====

|^Date^Author^Title^Notes|
|-|-|[[http://www.sspectra.com/sopra.html|Optical constants from Sopra labs]]|Optical constants of many different materials.  Widely quoted site.|
|Journal of Physical and Chemical Reference Data 9, 561 (1980)|H. H. Li|[[http://www.nist.gov/data/PDFfiles/jpcrd162.pdf|Refractive Index of Silicon and Germanium and Its Wavelength and Temperature Derivatives]]|Exhaustive compilation of ref. ind. of Si, Ge, temp dep etc. Available at NIST reprint site.|
|Journal of Physical and Chemical Reference Data 13, 103 (1984)|H. H. Li|[[http://www.nist.gov/data/PDFfiles/jpcrd240.pdf|Refractive Index of ZnS, ZnSe, and ZnTe and its wavelength and temperature derivatives]]|Exhaustive compilation of ref. ind. of ZnCh temp dep etc. Available at NIST reprint site.|
|Melles Griot Technical Manual, Materials Properties |Melles Griot|[[http://marketplace.idexop.com/store/SupportDocuments/MaterialProperties.pdf|Materials Properties]]|Good compilation of refractive index, transmission of different kinds of glasses - BK7, suprasil, CaF, crystal quartz, etc.  Also silicon and germanium.|
|Melles Griot Technical Manual, Optical Coatings |Melles Griot|[[http://marketplace.idexop.com/store/SupportDocuments/1-Optical%20Coating%20and%20Materials.pdf|Optical Coatings]]|Good discussion of coatings and materials, reflection, angles of incidence, phase changes, fringes etc.|
Trace: • equipment • site_notice • thermalcond • opticalspectrometers • vacuum_maintenance • manuals • travel
Navigation

Search

Toolbox

QR Code
